I have a Nokia 6230i USB Cable, and when i connect it to PC it says: 'USB Device not recognized', i tryed from bios to see if they all are enabled (and they are), i tryed some usb drivers, it. The following instructions are a guide on how to install the USB driver for the NTS. Writing this guide the Windows 7 driver was called Download for Windows XP/Server 2003/Vista/7/8/8.1. Driver Installation. Extract the downloaded zip file to a folder on your PC. Mode for:' and choose Windows XP (Service Pack 3).
Universal serial bus (USB) controllers are implemented as part of the Windows XP Service Pack 3 operating system. USB controllers are drivers that allow your USB devices, the USB ports and the computer to interface. If you are having issues with your USB devices, you may need to update the native drivers on your Windows XP SP3 computer.
Click 'Start' and right-click 'My Computer'.
Select 'Properties'. Click 'Hardware' in the System Property window that appears. Click the 'Device Manager' button.
Click 'Universal Serial Bus Controllers'. Right-click each USB Universal Host Controller and choose 'Update Driver', one at a time. Click 'Next' and 'Finish'.
Go to your motherboard or USB PCI card manufacturer's website if Windows XP SP3 does not have any updated drivers for your USB controller. Click the support or download sections to determine if a full motherboard update or a USB update is available. Double-click the downloaded driver file and click 'Next' through the driver installation wizard to install any available updates. The installation process does vary slightly depending on the manufacturer, but most driver installations are straightforward.
Restart your computer to complete the USB driver installation.
Video of the Day
Brought to you by Techwalla
More Articles
USB 2.0 on Windows XP and 2000
There are many reasons why problems with USB devices can occur. Keep in mind that USB Controllers are small pieces of hardware that allow your computer to operate USB connections. These Controllers need software drivers to operate properly. That’s why your first step is to check that you have the latest USB 2.0 drivers on your system.
There are many reasons why problems with USB devices can occur. Keep in mind that USB Controllers are small pieces of hardware that allow your computer to operate USB connections. These Controllers need software drivers to operate properly. That’s why your first step is to check that you have the latest USB 2.0 drivers on your system.
Start by opening Windows Explorer and right-clicking on My Computer. Click the Hardware tab, followed by the Device Manager Button. Towards the bottom of the list you should see a heading ‘Universal Serial Bus Controllers.’ Click the small plus sign next to it. This menu will expand to reveal one or more listings. To see if you have USB 2.0, look for a line that says ‘USB2 Enhanced Controller.’ The exact entry will vary slightly and don’t confuse it with other entries that may simply list ‘USB Universal Controller’. See the screenshot to the below for an example of how it may look. Note that there are no yellow exclamation points next to the entries – the yellow exclamations, indicate a problem with the device.
If you do see a yellow exclamation next to any of the USB entries, especially the USB2 Enhanced Controller, then there is a problem affecting the USB 2.0 driver on your system. To fix the problem, right click on the entry and select Properties. Click on the 'Troubleshoot' button and follow the prompts. In most cases this will help find a solution. The alternative is to right-click and select 'Update driver' while your computer is connected to the Internet.
OK, what if you look down the USB list and there is no entry with 'USB2 Enhanced Controller'? This generally means that you do not have the USB 2.0 driver installed. There are two steps you need to follow. Firstly you must ensure that you have installed either Windows XP Service Pack 3 or Windows 2000 Service Pack 4. Technically, XP users only need Windows XP Service Pack 1, but this would be risky as it leaves your system exposed to numerous security threats fixed with Service Pack 2.
If needed, download and install the Service Pack, then restart your system. Go back to the Device Manager - as shown in the first paragraph - and check the status of your USB controllers. If the USB2 Enhanced Controller has appeared without the yellow symbol, you should be ready to use USB 2.0. If not, you will need the specific USB 2.0 driver for your system. There are only six manufacturers of USB 2.0 controllers: Acer Labs, Intel, NEC, SiS, VIA and nVidia (which may appear as 'Standard Controller'), but sometimes they are re-branded by other companies. In this case, you will need to find out which Controller is on your system and visit the manufacturers site for an update or special instructions. For example, if you have the Via USB Controller, you will need the Via USB 2.0 driver (you can download a copy here).
OK, what if you look down the USB list and there is no entry with 'USB2 Enhanced Controller'? This generally means that you do not have the USB 2.0 driver installed. There are two steps you need to follow. Firstly you must ensure that you have installed either Windows XP Service Pack 3 or Windows 2000 Service Pack 4. Technically, XP users only need Windows XP Service Pack 1, but this would be risky as it leaves your system exposed to numerous security threats fixed with Service Pack 2.
If needed, download and install the Service Pack, then restart your system. Go back to the Device Manager - as shown in the first paragraph - and check the status of your USB controllers. If the USB2 Enhanced Controller has appeared without the yellow symbol, you should be ready to use USB 2.0. If not, you will need the specific USB 2.0 driver for your system. There are only six manufacturers of USB 2.0 controllers: Acer Labs, Intel, NEC, SiS, VIA and nVidia (which may appear as 'Standard Controller'), but sometimes they are re-branded by other companies. In this case, you will need to find out which Controller is on your system and visit the manufacturers site for an update or special instructions. For example, if you have the Via USB Controller, you will need the Via USB 2.0 driver (you can download a copy here).